If you want to know more about how to put down flooring successfully, talk to the contractors involved. When it comes to epoxy flooring, contractors in Dallas stress the need for the right preparation. This does not refer to the epoxy alone. It also refers to preparing the flooring before you apply the coating. This is the best way to ensure you get the floor you want.
You may order the most expensive epoxy floor coating on the market. It may be the very best currently available. If, however, the substrate – the cement floor, does not receive proper preparation, the epoxy coating will not adhere to the surface properly. The floors require proper preparation. This will involve more than a simple cleaning and removal of obvious contaminants such as dirt, grease and grime. It may also mean the following:
- Removal of cracks
- Patching of potholes and any other surface damage
- Curing of the repaired surface – if a fresh concrete slab is added, it must be left to cure for a minimum of 28 days
Following this initial prep work, epoxy flooring contractors will utilize one of two methods to “rough up” the concrete slabs. These are:
1. Acid washing or etching: In this process, the contractor takes a mop, dips it into a diluted solution of muriatic acid and then mops the floor before, rinsing it thoroughly. This is the easiest and less expensive way
2. Shot blasting: Dallas professionals state this the more thorough way to prepare a slab for an epoxy coating.
Contractors do not rush any of these steps.
Epoxy Flooring Contractors and Prepping
If you want a floor that is durable, you should consider the virtues of epoxy flooring. Contractors in Dallas recommend it highly, but they also provide a precaution. No matter how costly or highly recommended the product is, it will not work without the necessary preparatory work.