Concrete is an inexpensive, durable, firm, and primary building material frequently used in dams for spillways, core walls, stilling basins, slope protection and control towers. Prior to attempting any type of concrete repair in Naples, FL, it is important that all factors governing the deterioration or failure of the concrete structure be known. Here are some types of concrete repair methods.
The Dry-Pack Method
The dry-pack technique can be utilized on small holes in new concrete with a depth equal to or bigger than the surface diameter. Preparation of dry-pack mix usually comprises of about 1-part Portland cement and 2-1/2 parts sand to be mixed with water. You then add sufficient water to produce a mortar that sticks together.
Concrete Replacement
Concrete replacement is needed when one-half to one square foot areas or bigger extend wholly through the concrete sections or where the depth of destroyed concrete exceeds 6 inches. When this happens, normal concrete placement approaches should be utilized. Repair will be more effective if tried with already reinforcing steel.
Replacement of Unformed Concrete
Replacing deteriorated or destroyed areas in horizontal slabs involves no complicated process other than those utilized in good construction practices to place new slabs. Repair work can be bound to old concrete using a bond coat of equal cement and sand. It should have the consistency of whipped cream and be used immediately ahead of concrete placement so that it will not dry or set out.
Contact The Impact Group to learn the different types of concrete repair in Naples, FL.
